Configure Network In Gns3

  NE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 1 ITNE3007 Advanced Routing Project ITNE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 2 Objective(s) This assessment relates to the unit learning outcomes as in the unit descriptor. This assessment is designed to evaluate student’s ability on planning, configuring and verifying the implementation of secure enterprise LAN and WAN network solutions using multiple routing protocols. The following ULOs are assessed in this assessment. LO1 Explain basic routing concepts and plan the configuration and verification of routing protocols and their optimization in enterprise networks LO2 Analyse the technologies, components, and metrics used to implement and verify routing in diverse, large-scale internetworks based on enterprise requirements. LO3 Critically evaluate various multi-area routing functions and benefits for routing efficiencies in network operations in order to implement and verify routing in a complex enterprise network. LO4 Implement and verify a redistribution solution in a multi-protocol network with control path selection and loop-free topology according to a given network design meeting enterprise requirements. LO5 Evaluate common network security and performance issues and identify the tools needed to control the path INSTRUCTIONS These instructions apply to the Project Group Project (Weightage 20%) – The submissions should be uploaded on the LMS by Session 12 This Project will focus on student’s ability to implement an enterprise level network that runs multiple routing protocols. The project should be conducted as a group task by a group of 4 students. Upon the implementation of the network, students should produce a comprehensive report, which includes screenshots of configuration of routers and other nodes, and brief explanation of the screenshots. Students should implement the network based on the given scenario in a virtual environment using GNS3. Please make sure to name the devices with the group name. If any third-party content is used. The citation of sources is mandatory and should follow IEEE style. Scenario: ABC Pty is an Airline company which owns the public IP range 17.86.98.0/24 and AS number 31400. They had recently acquired a start-up software development company named XYZ Pty Ltd. The ABC Pty Ltd and XYZ Pty Ltd have been respectively running OSPF and EIGRP as their Interior Gateway Protocols. In order to establish connectivity between two sites, the management decided to use route redistribution. ABC Pty Ltd is connected to the internet through ISP1 with AS number 42000 using a BGP peering. A simplified network topology is given below with the IP Allocations for each network. ITNE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 3 Figure 1: Topology Diagram Table 1: IP Address Plan Device Name Interface IP Address ISP Router S0/0 10.0.1.253/30 Lo1 5.62.20.1/23 R1 S0/0 10.0.1.254/30 S0/1 172.17.3.1/30 Fa0/0 172.16.3.1/30 Lo0 1.1.1.1/32 Lo1 17.86.98.1/24 R2 Fa0/0 172.16.3.2/30 Fa0/1 172.16.0.1/24 Fa1/0 172.16.3.5/30 Lo0 2.2.2.2/32 R3 Fa0/0 172.16.1.1/24 Fa0/1 172.16.2.1/24 Fa1/0 172.16.3.6/30 R4 S0/1 172.17.3.2/30 Fa0/0 172.17.0.1/24 Fa0/1 172.17.3.5/30 R5 Fa0/0 172.17.1.1/24 Fa0/1 172.17.2.1/24 Fa1/0 172.17.3.6/30 ISP Router R1 R2 R3 R4 R5 ABC Pty Ltd XYZ Pty Ltd Fa0/0 S 0/0 S 0/1 S 0/1 Fa0/1 Fa0/1 Fa0/0 Fa0/0 Fa0/0 Fa0/1 Fa0/1 Fa1/0 S 0/0 Fa0/0 Fa1/0 Fa1/0 ITNE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 4 You are required to implement the given topology in GNS3 environment and configure the following tasks to produce this topology as a proof of concept to the management of ABC Pty Ltd Task 1: Configuring Interior Gateway Protocols i. Configure OSPF with passive interfaces in ABC Pty Ltd network (exclude Loopback interfaces from being advertised in OSPF process) ii. Configure EIGRP with passive interfaces in XYZ Pty Ltd network Task 2: Re-distribute routes into Interior Gateway Protocols i. Re-distribute routes in ABC Pty Ltd network into EIGRP routing process running in Router 1 ii. Re-distribute routes in XYZ Pty Ltd network into OSPF routing process running in Router 1 Task 3: Configure BGP in the network i. Configure eBGP Peering between Router 1 and ISP router ii. Configure iBGP Peering between Router 1 and Router 2 Task 4: Securing routing table with Filtering Ingress Routes i. Configure Ingress Filtering in ISP router What to Submit. During Session 3, students should present the member list and one A4 page proposal on how they would plan and implement the network. During Session 5, students should demonstrate the initial topology implementation on gns3 and connectivity among the local sites. The configuration of Interior Gateway Protocols is optional at this stage. During Session 10, students should demonstrate the configuration of Interior Gateway Protocol and connectivity between the two sites. Route re-distribution should be configured for Interior Gateway Protocol During Session 12, students should demonstrate the configuration of Exterior Gateway Protocol and connectivity between all the nodes. Before each of the above demonstrations deadlines, students should submit the gns3 file on Moodle submission links. The proposal and final report should be submitted to the Moodle drop-box for Project. Note that incidents of plagiarism will be penalized. Please Note: All work should be submitted by the due date and time. Late submissions will be penalized at the rate of 10% per day including weekends. ITNE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 5 Marking Guide: 100 Marks Please note that the Assignment will contribute towards 20% of the final grade. Task Decryption Marks The Proposal 10 Proposal Layout The proposal style, language and structure should be appropriate. The proposal should be written in A4 page (Except the cover page) The proposal must contain i. Cover page with Unit Code, Group Name, Unit Name and Student IDs ii. Requirement iii. Proposed Solution iv. Step Involved v. Potential Obstacles Final Report 60 Report Layout The report style, language and structure should be appropriate. All screenshots and descriptions need to be compiled and in a single final report and any given suggestions need to be incorporated. The report must contain i. Cover page with Unit Code, Group Name, Unit Name and Student IDs ii. Table of Contents iii. Introduction iv. Technical Discussion v. Critical Analysis vi. Conclusion 4 Introduction The students should include purpose of the report, sections covered which should convince the reader that the report is worth reading. Word count limit – 125 words 4 Technical Discussion This section should include the configurations done in the virtualized network environment. You should break down this section into four tasks and include at least 7 screen shots from each of these tasks and a brief description i. Successful configuration of task 1 ii. Successful configuration of task 2 iii. Successful configuration of task 3 iv. Successful configuration of task 4 10 ITNE3007 Advanced Routing Copyright © 2015-2018 VIT, All Rights Reserved. 6 Critical Analysis The students are required to provide a critical analysis of the deployed network considering: i. Evaluate performance issues (including routing loops) related to networks that run multiple routing protocols with route redistribution ii. Compare and contrast Interior Gateway Protocol vs Exterior Gateway Protocol iii. Compare and contrast OSPF vs EIGRP iv. Analyse the configuration of passive interface command in OSPF and EIGRP assure a secured network v. Analyse the filtering of ingress router updates with Route Maps, increase the security in the providers network vi. Evaluate WAN connection methods available for connecting two sites 35 Conclusion Summarize your findings. Word count limit – 125 words 4 References Should follow IEEE style 3 Demonstrations 30 In class demonstration during Lesson 5 You are required to demonstrate in class i. Initial topology implementation on gns3 ii. Connectivity among the local sites 10 In class demonstration during Lesson 9 You are required to demonstrate in class i. The configuration of Interior Gateway Protocol ii. Connectivity between the Melbourne and Sydney sites iii. Route re-distribution should be configured for IGP 10 In class demonstration during Lesson 12 You are required to demonstrate in class i. The configuration of Exterior Gateway Protocol ii. Connectivity between all the nodes 10